7 Signs Of Mold In Walls And How To Deal With It

Picture This: You suspect your home may have a mold issue, even though no visible mold exists. What might be happening?

Hidden mold lurks within walls in many cases, and it is more prevalent than many homeowners realize. That's where Biotek NYC comes in. We have the best mold inspection specialists in Brooklyn to help you find mold in your walls and eliminate it.

Read this blog to learn more about finding mold in your walls and how to get rid of it effectively.

7 Telltale Signs That You Have Mold In Your Walls

Mold growth in your home can pose serious health risks and cause significant damage to your property. Detecting mold and addressing it promptly before it spreads and worsens is essential. 

But how do you know if you have mold on your walls? Here are seven telltale signs that may indicate the presence of mold in your home.

Visible Mold Growth

The naked eye can easily see mold growth. Look for black spots, patches, or fuzzy textures on your walls, ceiling, or floors. Check for mold in areas where moisture accumulates, such as bathrooms, kitchens, basements, laundry rooms, etc. If you notice any visible mold, it's crucial to investigate further by hiring mold removal specialists and taking action immediately.

Musty Odor

A musty smell can be a clear indication of mold growth. When mold grows, it releases spores into the air, which can cause an unpleasant odor. The smell may resemble damp earth, mildew, or decay. If you notice an unusual odor in your home that doesn't go away with cleaning or air fresheners, it could be due to mold growth.

Water Stains

Water stains on your walls or ceilings can lead to mold growth. Check for discolored patches or streaks on surfaces, especially near windows, rooflines, or pipes. These stains may indicate a leak or condensation issue, which can foster mold development. Addressing the source of the water issue is vital to preventing mold growth.

Peeling Paint or Wallpaper

When mold grows behind paint or wallpaper, it can cause them to peel off or bubble up. This is because the moisture from the mold creates pressure between the layers of paint or paper, leading to separation. If you notice paint or wallpaper peeling off, check for signs of mold by gently lifting the edge or peeling back a corner.

Drywall Cracks

Cracks in drywall can provide an entry point for moisture, allowing mold to grow. Hairline cracks or more giant fissures around windows, doors, or corners may indicate mold growth. Inspect these areas closely for any signs of greenish-black speckles or fuzz.

Soggy Textured Ceilings

Popcorn ceilings or textured finishes can absorb moisture, creating an ideal surface for mold growth. If your ceiling feels soggy or has visible water stains, there might be hidden mold growth above. Use a ladder and a flashlight to scrutinize the area.

Health Symptoms

Mold exposure can trigger various health issues, including respiratory problems, allergic reactions, and neurological symptoms. It may be related to mold exposure if you experience sneezing, congestion, coughing, headaches, or irritated eyes at home. Pay attention to any changes in your health, especially during the winter when windows are closed and indoor humidity levels are higher.

Detecting mold early on prevents its spread and potential health hazards. If you keep an eye out and act quickly by employing mold inspection experts in Brooklyn, you can keep your family safe at home.

3 Ways You Can Deal With Mold In Your Walls

Here are three ways you can do mold removal inside your walls:

Use bleach

One of the most effective ways to get rid of mold is by using bleach. Mix one part bleach with ten parts water in a bucket, put on gloves, and scrub the affected area with a soft-bristled brush. Wear protective gear like goggles and a face mask because bleach can irritate your eyes and respiratory system. After scrubbing, let the solution sit for 15 minutes before rinsing it with clean water. Be careful when using bleach around residential and commercial properties.

Replace drywall

If the mold has penetrated deeply into your walls, it might be time to replace the drywall. This is especially true if the mold has caused structural damage or poses a health risk. Cut out the damaged section of the drywall, leaving a few inches around the edges intact. Dispose of the removed drywall properly, and install new drywall after cleaning and preparing the surface.

Call a Professional

If the mold infestation is widespread or you are uncomfortable dealing with it yourself, consider hiring professional mold removal specialists. These mold inspectors have specialized equipment and training to safely remove mold without spreading its spores. Choose a reputable company that follows industry standards and provides a clear report detailing its process and recommendations.

Dealing with mold on your walls requires prompt action to avoid further damage and potential health risks. Remember to always prioritize safety precautions during the cleanup process. 

Don't hesitate to hire mold removal services, as these services will save you time and money in the long run.

Call Biotek NYC - The Mold Removal Specialists

In order to ensure a safe and healthy environment, regular mold testing is required. Water stains, musty odors, and discoloration are vital indicators that demand prompt attention due to mold spores. A timely mold remediation process is crucial to preventing the spread of mold and potentially high mold inspection costs. 

Effective mold testing involves identifying the moisture source, improving ventilation, and adequately cleaning. Seeking Biotek NYC's assistance for extensive infestations ensures thorough removal. When you need trustworthy home restoration services, call Biotek, one of the top mold removal companies.

We can safeguard your homes with our team of professional mold inspection specialists in Brooklyn to address mold issues swiftly.